Pressure reducing station

In order to obtain the right pressure at the consumption point it requires CONSISTENCY, ACCURACY and RELIABILITY from a reducing valve. Thus it is necessary to install : A bypass and isolating valve, to ensure continuation of supply when the reducing valve is being serviced.

Reformer Valve in a reducing station will improve steam quality, productivity and pressure reducing valve service life is extended, since the effective removal of condensate and scale protects the main valve from erosion.

Safety valve is installed on the downstream of a PRV. Since the pressure vessels are fed with low steam pressure (through a PRV) they need complete protection especially where there is a risk of explosion. The safety valve should be sized for a total quantity of steam that passes when the PRV is fully open.

For the best possible operation of a Pressure Reducing Station, correct sizing of pipework and associated fitting / components is extremely important. Mazda designs, manufactures and tests all the components of PRS unit in its own facilities, thereby guaranteeing “Single Unit Responsibility”.

1) Reformer Valve
2) Pressure Reducing Valve
3) Isolating Valve
4) Bypass Valve
5) Safety Valve